Not so Fast Bald Tires

Ban is one of the fast car components wear out and must be quickly replaced. Especially as a pedestal or leg for the car, tires must be rubbing against the track every car in its path is executed. Inevitably the lining was quickly eroded and worn.
Therefore, car owners should rotate the position of the vehicle tires every period or after a long journey, like a homecoming.
In addition to travel hundreds of miles, the tires also run over a variety of road conditions.
Rotation or change of position must be performed on all four tires car tires. It was intended to maintain the balance of control or traction to make it more leverage.
So how do I do rotations?
1. Front-wheel drive car
The first step, remove the right front tire and make it as a spare tire. Then the left front tire off and plug in the left rear wheel. To replace the front tire left the right rear tire use.
As for the right front tire right of the front wheels that have been removed and used as a spare tire is replaced by the left rear tire. As for the right rear tire was replaced by a spare tire.
Format rotation as it does put the front tires. This is because the front tires wear faster than rear tires. In the car in all types of drive systems, front tire when the car became the main subject of maneuver.
On the other hand, the level of most tires are bald on the outside when mounted on wheels. So with such a rotation of the tire that has not been eroded from the rotating tires can still be placed on the outer side. With so stay safe and comfortable driving.
2.Mobil rear wheel
How to rotate the tires on the car that rear wheel in principle no different with front-wheel drive car. The first step, the front right wheel to move to left rear wheels and tires on the wheels left the place as the spare tire.
To replace the front wheel to the right that has been placed on the left front wheel, rear wheel using a tire on the right. The tires on the front left wheel which is used as the spare tire spare tire replaced.
Andi cautioned that tire rotation is done correctly and regularly. Although by default, he added, tire rotation is recommended every car has drove 5,000 kilometers. But for long trips should be done, although not yet reached that distance. For convenience and safety.
3. Do spooring and appropriately balancing
When finished rotating the tires, you should do spooring and balancing. Spooring is a great way to keep the harmony of motion antarkeempat existing tires on all four wheels. The balancing is a way to keep the balance of tires or wheels swivel motion car is maintained, thus supporting the stability of motion or the car's speed.
Only, for maximum results, how do the two activities must be appropriate. In addition to selecting a repair shop to have adequate equipment and good reputation should also do a thorough inspection of all components of the legs of the car.
Several vital components in the legs that is tierod, tierod end, balljoint, Laker, until bushing. The goal is to ascertain the condition of such components as well replace them with new ones when needed. Therefore, the suspension problems also lead to tire failure, although rotated as good as any.
Source: Tempo Interactive